* Mark as stable.

svn path=/nixpkgs/branches/0.9-release/; revision=4650

STABLE

@@ -0,0 +1 @@
+1

VERSION

@@ -0,0 +1 @@
+0.9

build/Xft-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=$freetype/bin:$fontconfig/bin:/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd fcpackage*/Xft || exit 1
-./configure --prefix=$top --x-includes=/usr/X11/include --x-libraries=/usr/X11/lib || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf fcpackage* || exit 1

build/aterm-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src
-cd aterm-*
-./configure --prefix=$top
-make
-make install
-cd ..
-rm -rf aterm-*

build/atk-build.sh

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib
-
-top=`pwd` || exit 1
-tar xvfj $src || exit 1
-cd atk-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf atk-* || exit 1

build/db4-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd db-*/build_unix || exit 1
-../dist/configure --prefix=$top --enable-cxx --enable-compat185 || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf db-* || exit 1

build/fontconfig-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=$freetype/bin:/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd fcpackage*/fontconfig || exit 1
-./configure --prefix=$top --with-confdir=$top/etc/fonts --x-includes=/usr/X11/include --x-libraries=/usr/X11/lib || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf fcpackage* || exit 1

build/freetype-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfj $src || exit 1
-cd freetype-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf freetype-* || exit 1

build/glib-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:/bin:/usr/bin
-
-top=`pwd`
-tar xvfj $src
-cd glib-*
-./configure --prefix=$top
-make
-make install
-cd ..
-rm -rf glib-*

build/gnet-build.sh

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd gnet-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf gnet-* || exit 1

build/gtk+-build.sh

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:$freetype/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig:$atk/lib/pkgconfig:$pango/lib/pkgconfig:$fontconfig/lib/pkgconfig:$Xft/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib:$atk/lib:$pango/lib:$fontconfig/lib:$Xft/lib
-
-top=`pwd`
-tar xvfj $src || exit 1
-cd gtk+-* || exit 1
-./configure --prefix=$top --x-includes=/usr/X11/include --x-libraries=/usr/X11/lib || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf gtk+-* || exit 1

build/gtkspell-build.sh

@@ -1,15 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig:$atk/lib/pkgconfig:$pango/lib/pkgconfig:$gtk/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib:$atk/lib:$pango/lib:$gtk/lib:$pspell/lib:$fontconfig/lib:$Xft/lib:$freetype/lib:
-export C_INCLUDE_PATH=$pspell/include
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd gtkspell-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf gtkspell-* || exit 1

build/httpd-build.sh

@@ -1,13 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-export LD_LIBRARY_PATH=$ssl/lib:
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd httpd-* || exit 1
-./configure --prefix=$top --enable-ssl --with-ssl=$ssl --with-berkeley-db=$db4 --enable-mods-shared=all || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf httpd-* || exit 1

build/libxml2-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd libxml2-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd .. || exit 1
-rm -rf libxml2-* || exit 1

build/openssl-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd openssl-* || exit 1
-./config --prefix=$top shared || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf openssl-* || exit 1

build/pan-build-2.sh

@@ -1,20 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:$gnet/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig:$atk/lib/pkgconfig:$pango/lib/pkgconfig:$gtk/lib/pkgconfig:$gtkspell/lib/pkgconfig:$libxml/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib:$atk/lib:$pango/lib:$gtk/lib:$gnet/lib:$pspell/lib:$gtkspell/lib:$fontconfig/lib:$Xft/lib:$freetype/lib
-
-# A bug in gtkspell: the pspell library path is not exported
-# through pkgconfig.
-export LIBRARY_PATH=$pspell/lib
-
-export LDFLAGS=-s
-
-top=`pwd`
-tar xvfj $src || exit 1
-cd pan-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf pan-* || exit 1

build/pan-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:$gnet/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig:$atk/lib/pkgconfig:$pango/lib/pkgconfig:$gtk/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib:$atk/lib:$pango/lib:$gtk/lib:$gnet/lib
-
-top=`pwd`
-tar xvfj $src
-cd pan-*
-./configure --prefix=$top
-make
-make install

build/pan-run.sh

@@ -1,10 +0,0 @@
-#! /bin/sh
-
-export LD_LIBRARY_PATH=$glib/lib:$atk/lib:$pango/lib:$gtk/lib:$gnet/lib:$pspell/lib:$gtkspell/lib
-
-ldd $pan/bin/pan
-
-prog=$1
-shift
-
-$pan/bin/$prog $*

build/pango-build.sh

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-export PATH=$pkgconfig/bin:$freetype/bin:/bin:/usr/bin
-export PKG_CONFIG_PATH=$glib/lib/pkgconfig:$fontconfig/lib/pkgconfig:$Xft/lib/pkgconfig
-export LD_LIBRARY_PATH=$glib/lib:$fontconfig/lib:$Xft/lib
-
-top=`pwd` || exit 1
-tar xvfj $src || exit 1
-cd pango-* || exit 1
-./configure --prefix=$top --x-includes=/usr/X11/include --x-libraries=/usr/X11/lib || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf pango-* || exit 1

build/pkgconfig-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd pkgconfig-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd .. || exit 1
-rm -rf pkgconfig-* || exit 1

build/populate-linkdirs.pl

@@ -1,48 +0,0 @@
-#! /usr/bin/perl -w
-
-use strict;
-use Cwd;
-
-my $selfdir = cwd;
-
-# For each activated package, create symlinks.
-
-sub createLinks {
-    my $srcdir = shift;
-    my $dstdir = shift;
-
-    my @srcfiles = glob("$srcdir/*");
-
-    foreach my $srcfile (@srcfiles) {
-        my $basename = $srcfile;
-        $basename =~ s/^.*\///g; # strip directory
-        my $dstfile = "$dstdir/$basename";
-        if (-d $srcfile) {
-            # !!! hack for resolving name clashes
-            if (!-e $dstfile) {
-                mkdir $dstfile, 0755 or 
-                    die "error creating directory $dstfile";
-            }
-            -d $dstfile or die "$dstfile is not a directory";
-            createLinks($srcfile, $dstfile);
-        } elsif (-l $dstfile) {
-            my $target = readlink($dstfile);
-            die "collission between $srcfile and $target";
-        } else {
-            print "linking $dstfile to $srcfile\n";
-            symlink($srcfile, $dstfile) or
-                die "error creating link $dstfile";
-        }
-    }
-}
-
-foreach my $name (keys %ENV) {
-
-    next unless ($name =~ /^act.*$/);
-
-    my $pkgdir = $ENV{$name};
-
-    print "merging $pkgdir\n";
-
-    createLinks("$pkgdir", "$selfdir");
-}

build/pspell-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd pspell-* || exit 1
-./configure --prefix=$top || exit 1
-make || exit 1
-make install || exit 1
-cd $top || exit 1
-rm -rf pspell-* || exit 1

build/subversion-build.sh

@@ -1,41 +0,0 @@
-#! /bin/sh
-
-export PATH=$libxml/bin:/bin:/usr/bin:/usr/local/bin
-export LD_LIBRARY_PATH=$ssl/lib:
-
-export LDFLAGS=-s
-
-top=`pwd`
-
-if test $localServer; then
-    extraflags="--with-berkeley-db=$db4 $extraflags"
-fi
-
-if test $httpsClient; then
-    extraflags="--with-ssl --with-libs=$ssl $extraflags"
-fi
-
-if test $httpServer; then
-    extraflags="--with-apxs=$httpd/bin/apxs --with-apr=$httpd --with-apr-util=$httpd $extraflags"
-    extramakeflags="APACHE_LIBEXECDIR=$top/modules $extramakeflags"
-fi
-
-if test $pythonBindings; then
-    extraflags="--with-swig=$swig $extraflags"
-fi
-
-echo "extra flags: $extraflags"
-
-tar xvfz $src || exit 1
-cd subversion-* || exit 1
-./configure --prefix=$top $extraflags || exit 1
-make $extramakeflags || exit 1
-make install $extramakeflags || exit 1
-
-if test $pythonBindings; then
-    make swig-py || exit 1
-    make install-swig-py || exit 1
-fi
-
-cd $top || exit 1
-rm -rf subversion-* || exit 1

build/swig-build.sh

@@ -1,12 +0,0 @@
-#! /bin/sh
-
-export PATH=/bin:/usr/bin:/usr/local/bin
-
-top=`pwd`
-tar xvfz $src || exit 1
-cd SWIG-* || exit 1
-./configure --prefix=$top || exit 1
-gmake || exit 1
-gmake install || exit 1
-cd $top || exit 1
-rm -rf SWIG-* || exit 1

descriptors/Xft-20021121.fix

@@ -1,11 +0,0 @@
-Descr(
-  [ Bind("pkgId", "Xft-20021121")
-  , Bind("releaseId", "1")
-
-  , Bind("freetype", Fix("./freetype-2.1.4.fix"))
-  , Bind("fontconfig", Fix("./fontconfig-20021121.fix"))
-
-  , Bind("src", Url("2f2852c80924a9b5356c3037a471c1a1", "http://fontconfig.org/release/fcpackage.2_1.tar.gz"))
-  , Bind("build", Local("../build/Xft-build.sh"))
-  ]
-)

descriptors/aterm-2.0.fix

@@ -1,10 +0,0 @@
-Descr(
-  [ Bind("pkgId", "aterm-2.0")
-  , Bind("releaseId", "1")
-
-  , Bind("createGCC", True)
-
-  , Bind("src", Url("853474e4bcf4a85f7d38a0676b36bded", "http://www.cwi.nl/projects/MetaEnv/aterm/aterm-2.0.tar.gz"))
-  , Bind("build", Local("../build/aterm-build.sh"))
-  ]
-)

descriptors/atk-1.2.0.fix

@@ -1,11 +0,0 @@
-Descr(
-  [ Bind("pkgId", "atk-1.2.0")
-  , Bind("releaseId", "1")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("glib", Fix("./glib-2.2.1.fix"))
-
-  , Bind("src", Url("06a84758129554ae044af8865ecb6f1c", "ftp://ftp.gtk.org/pub/gtk/v2.2/atk-1.2.0.tar.bz2"))
-  , Bind("build", Local("../build/atk-build.sh"))
-  ]
-)

descriptors/db-4.0.14.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "db-4.0.14")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("12262c64fcd64b772e7cffad8e4d0ebc", "http://www.sleepycat.com/update/snapshot/db-4.0.14.tar.gz"))
-  , Bind("build", Local("../build/db4-build.sh"))
-  ]
-)

descriptors/fontconfig-20021121.fix

@@ -1,10 +0,0 @@
-Descr(
-  [ Bind("pkgId", "fontconfig-20021121")
-  , Bind("releaseId", "1")
-
-  , Bind("freetype", Fix("./freetype-2.1.4.fix"))
-
-  , Bind("src", Url("2f2852c80924a9b5356c3037a471c1a1", "http://fontconfig.org/release/fcpackage.2_1.tar.gz"))
-  , Bind("build", Local("../build/fontconfig-build.sh"))
-  ]
-)

descriptors/freetype-2.1.4.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "freetype-2.1.4")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("1fc0b188f1fe1216776e5855d2da141f", "http://easynews.dl.sourceforge.net/sourceforge/freetype/freetype-2.1.4.tar.bz2"))
-  , Bind("build", Local("../build/freetype-build.sh"))
-  ]
-)

descriptors/glib-2.2.1.fix

@@ -1,10 +0,0 @@
-Descr(
-  [ Bind("pkgId", "glib-2.2.1")
-  , Bind("releaseId", "1")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-
-  , Bind("src", Url("42406a17819080326e105f8333963b97", "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-2.2.1.tar.bz2"))
-  , Bind("build", Local("../build/glib-build.sh"))
-  ]
-)

descriptors/gnet-1.1.8.fix

@@ -1,11 +0,0 @@
-Descr(
-  [ Bind("pkgId", "gnet-1.1.8")
-  , Bind("releaseId", "1")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("glib", Fix("./glib-2.2.1.fix"))
-
-  , Bind("src", Url("da2b5de278e96a5b907c2e2304bf6542", "http://www.gnetlibrary.org/src/gnet-1.1.8.tar.gz"))
-  , Bind("build", Local("../build/gnet-build.sh"))
-  ]
-)

descriptors/gtk+-2.2.1.fix

@@ -1,16 +0,0 @@
-Descr(
-  [ Bind("pkgId", "gtk+-2.2.1")
-  , Bind("releaseId", "2")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("glib", Fix("./glib-2.2.1.fix"))
-  , Bind("atk", Fix("./atk-1.2.0.fix"))
-  , Bind("freetype", Fix("./freetype-2.1.4.fix"))
-  , Bind("fontconfig", Fix("./fontconfig-20021121.fix"))
-  , Bind("Xft", Fix("./Xft-20021121.fix"))
-  , Bind("pango", Fix("./pango-1.2.1.fix"))
-
-  , Bind("src", Url("dfd5755fddb26a46c96bfaa813280ac4", "ftp://ftp.gtk.org/pub/gtk/v2.2/gtk+-2.2.1.tar.bz2"))
-  , Bind("build", Local("../build/gtk+-build.sh"))
-  ]
-)

descriptors/gtkspell-2.0.2.fix

@@ -1,18 +0,0 @@
-Descr(
-  [ Bind("pkgId", "gtkspell-2.0.2")
-  , Bind("releaseId", "1")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("glib", Fix("./glib-2.2.1.fix"))
-  , Bind("atk", Fix("./atk-1.2.0.fix"))
-  , Bind("freetype", Fix("./freetype-2.1.4.fix"))
-  , Bind("fontconfig", Fix("./fontconfig-20021121.fix"))
-  , Bind("Xft", Fix("./Xft-20021121.fix"))
-  , Bind("pango", Fix("./pango-1.2.1.fix"))
-  , Bind("gtk", Fix("./gtk+-2.2.1.fix"))
-  , Bind("pspell", Fix("./pspell-.12.2.fix"))
-
-  , Bind("src", Url("385daba9bebfdc7fdbdf524e07deb920", "http://pan.rebelbase.com/download/extras/gtkspell/SOURCES/gtkspell-2.0.2.tar.gz"))
-  , Bind("build", Local("../build/gtkspell-build.sh"))
-  ]
-)

descriptors/httpd-2.0.46.fix

@@ -1,11 +0,0 @@
-Descr(
-  [ Bind("pkgId", "httpd-2.0.46")
-  , Bind("releaseId", "1")
-
-  , Bind("ssl", Fix("./openssl-0.9.7b.fix"))
-  , Bind("db4", Fix("./db-4.0.14.fix"))
-
-  , Bind("src", Url("ff682f82f0808eb01df60824d959ebe8", "http://apache.cs.uu.nl/dist/httpd/httpd-2.0.46.tar.gz"))
-  , Bind("build", Local("../build/httpd-build.sh"))
-  ]
-)

descriptors/libxml2-2.5.7.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "libxml2-2.5.7")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("f7ed96959fbddf366af64652804d1b57", "ftp://fr.rpmfind.net/pub/libxml/libxml2-2.5.7.tar.gz"))
-  , Bind("build", Local("../build/libxml2-build.sh"))
-  ]
-)

descriptors/openssl-0.9.7b.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "openssl-0.9.7b")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("fae4bec090fa78e20f09d76d55b6ccff", "http://www.openssl.org/source/openssl-0.9.7b.tar.gz"))
-  , Bind("build", Local("../build/openssl-build.sh"))
-  ]
-)

descriptors/pan-0.14.0.fix

@@ -1,21 +0,0 @@
-Descr(
-  [ Bind("pkgId", "pan-0.14.0")
-  , Bind("releaseId", "1")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("libxml", Fix("./libxml2-2.5.7.fix"))
-  , Bind("glib", Fix("./glib-2.2.1.fix"))
-  , Bind("atk", Fix("./atk-1.2.0.fix"))
-  , Bind("freetype", Fix("./freetype-2.1.4.fix"))
-  , Bind("fontconfig", Fix("./fontconfig-20021121.fix"))
-  , Bind("Xft", Fix("./Xft-20021121.fix"))
-  , Bind("pango", Fix("./pango-1.2.1.fix"))
-  , Bind("gtk", Fix("./gtk+-2.2.1.fix"))
-  , Bind("gnet", Fix("./gnet-1.1.8.fix"))
-  , Bind("pspell", Fix("./pspell-.12.2.fix"))
-  , Bind("gtkspell", Fix("./gtkspell-2.0.2.fix"))
-
-  , Bind("src", Url("b2702adadb84c2e0d52d2bb029c05206", "http://pan.rebelbase.com/download/releases/0.14.0/SOURCE/pan-0.14.0.tar.bz2"))
-  , Bind("build", Local("../build/pan-build-2.sh"))
-  ]
-)

descriptors/pango-1.2.1.fix

@@ -1,14 +0,0 @@
-Descr(
-  [ Bind("pkgId", "pango-1.2.1")
-  , Bind("releaseId", "2")
-
-  , Bind("pkgconfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("glib", Fix("./glib-2.2.1.fix"))
-  , Bind("freetype", Fix("./freetype-2.1.4.fix"))
-  , Bind("fontconfig", Fix("./fontconfig-20021121.fix"))
-  , Bind("Xft", Fix("./Xft-20021121.fix"))
-
-  , Bind("src", Url("6b354ef14e75739a92b5b78f4ca3165a", "ftp://ftp.gtk.org/pub/gtk/v2.2/pango-1.2.1.tar.bz2"))
-  , Bind("build", Local("../build/pango-build.sh"))
-  ]
-)

descriptors/pkgconfig-0.15.0.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "pkgconfig-0.15.0")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("a7e4f60a6657dbc434334deb594cc242", "http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-0.15.0.tar.gz"))
-  , Bind("build", Local("../build/pkgconfig-build.sh"))
-  ]
-)

descriptors/pspell-.12.2.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "pspell-.12.2")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("cfd3816b2372932a1b71c0ce4e9f881e", "http://unc.dl.sourceforge.net/sourceforge/pspell/pspell-.12.2.tar.gz"))
-  , Bind("build", Local("../build/pspell-build.sh"))
-  ]
-)

descriptors/subversion-0.23.0.fix

@@ -1,24 +0,0 @@
-Descr(
-  [ Bind("pkgId", "subversion-0.23.0")
-  , Bind("releaseId", "3")
-
-  , Bind("localServer", Bool(True))
-  , Bind("httpsClient", Bool(True))
-  , Bind("httpServer", Bool(True))
-  , Bind("httpsServer", Bool(True))
-  , Bind("pythonBindings", Bool(True))
-
-  , Bind("libxml", Fix("./libxml2-2.5.7.fix"))
-
-  , Bind("db4", If(Var("localServer"), Fix("./db-4.0.14.fix"), ""))
-
-  , Bind("ssl", If(Var("httpsClient"), Fix("./openssl-0.9.7b.fix"), ""))
-
-  , Bind("httpd", If(Var("httpServer"), Fix("./httpd-2.0.46.fix"), ""))
-
-  , Bind("swig", If(Var("pythonBindings"), Fix("./swig-1.3.19.fix"), ""))
-
-  , Bind("src", Url("59661f2145976437b371a0ab3a555dbd", "http://subversion.tigris.org/files/documents/15/4218/subversion-0.23.0.tar.gz"))
-  , Bind("build", Local("../build/subversion-build.sh"))
-  ]
-)

descriptors/swig-1.3.19.fix

@@ -1,8 +0,0 @@
-Descr(
-  [ Bind("pkgId", "swig-1.3.19")
-  , Bind("releaseId", "1")
-
-  , Bind("src", Url("a733455544426b31868dd87fc162e750", "http://heanet.dl.sourceforge.net/sourceforge/swig/swig-1.3.19.tar.gz"))
-  , Bind("build", Local("../build/swig-build.sh"))
-  ]
-)

descriptors/system.fix

@@ -1,26 +0,0 @@
-Descr(
-  [ Bind("pkgId", Str("system"))
-  , Bind("releaseId", Str("5"))
-
-  , Bind("actATerm", Fix("./aterm-2.0.fix"))
-  , Bind("actPkgConfig", Fix("./pkgconfig-0.15.0.fix"))
-  , Bind("actLibxml", Fix("./libxml2-2.5.7.fix"))
-  , Bind("actGlib", Fix("./glib-2.2.1.fix"))
-  , Bind("actAtk", Fix("./atk-1.2.0.fix"))
-  , Bind("actFreetype", Fix("./freetype-2.1.4.fix"))
-  , Bind("actFontconfig", Fix("./fontconfig-20021121.fix"))
-  , Bind("actXft", Fix("./Xft-20021121.fix"))
-  , Bind("actPango", Fix("./pango-1.2.1.fix"))
-  , Bind("actGtk", Fix("./gtk+-2.2.1.fix"))
-  , Bind("actGnet", Fix("./gnet-1.1.8.fix"))
-  , Bind("actPspell", Fix("./pspell-.12.2.fix"))
-  , Bind("actGtkspell", Fix("./gtkspell-2.0.2.fix"))
-  , Bind("actPan", Fix("./pan-0.14.0.fix"))
-  , Bind("actSubversion", Fix("./subversion-0.23.0.fix"))
-  , Bind("actDb4", Fix("./db-4.0.14.fix"))
-  , Bind("actHttpd", Fix("./httpd-2.0.46.fix"))
-  , Bind("actSsl", Fix("./openssl-0.9.7b.fix"))
-
-  , Bind("build", Local("../build/populate-linkdirs.pl"))
-  ]
-)

doc/Makefile

@@ -0,0 +1,27 @@
+ENV = SGML_CATALOG_FILES=$(docbookcatalog)
+
+XMLLINT = $(ENV) xmllint --catalogs
+XSLTPROC = $(ENV) xsltproc --catalogs \
+ --param section.autolabel 1 \
+ --param section.label.includes.component.label 1 \
+ --param html.stylesheet \'style.css\' \
+ --param xref.with.number.and.title 1 \
+ --param toc.section.depth 3
+
+NEWS_OPTS = \
+ --stringparam generate.toc "article nop" \
+ --stringparam section.autolabel.max.depth 0 \
+ --stringparam header.rule 0
+
+all: NEWS.html NEWS.txt
+
+NEWS.html: release-notes.xml
+	$(XSLTPROC) --nonet --xinclude --output $@ $(NEWS_OPTS) \
+	  $(docbookxsl)/html/docbook.xsl release-notes.xml
+
+NEWS.txt: release-notes.xml
+	$(XSLTPROC) --nonet --xinclude quote-literals.xsl release-notes.xml | \
+	  $(XSLTPROC) --nonet --output $@.tmp.html $(NEWS_OPTS) \
+	  $(docbookxsl)/html/docbook.xsl -
+	LANG=en_US w3m -dump $@.tmp.html > $@
+	rm $@.tmp.html

doc/quote-literals.xsl

@@ -0,0 +1,40 @@
+<?xml version="1.0"?>
+
+<xsl:stylesheet
+  version="1.0"
+  xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+  xmlns:str="http://exslt.org/strings"
+  extension-element-prefixes="str">
+
+  <xsl:output method="xml"/>
+  
+  <xsl:template match="function|command|literal|varname|filename|option|quote">`<xsl:apply-templates/>'</xsl:template>
+  
+  <xsl:template match="token"><xsl:text>    </xsl:text><xsl:apply-templates /><xsl:text>
+</xsl:text></xsl:template>
+
+  <xsl:template match="screen|programlisting">
+    <screen><xsl:apply-templates select="str:split(., '&#xA;')" /></screen>
+  </xsl:template>
+
+  <xsl:template match="section[following::section]">
+    <section>
+      <xsl:apply-templates />
+      <screen><xsl:text>
+      </xsl:text></screen>        
+    </section>
+  </xsl:template>
+
+  <xsl:template match="*">
+    <xsl:element name="{name(.)}" namespace="{namespace-uri(.)}">
+      <xsl:copy-of select="namespace::*" />
+      <xsl:for-each select="@*">
+	<xsl:attribute name="{name(.)}" namespace="{namespace-uri(.)}">
+	  <xsl:value-of select="."/>
+	</xsl:attribute>
+      </xsl:for-each>
+      <xsl:apply-templates/>
+    </xsl:element>
+  </xsl:template>
+
+</xsl:stylesheet>

doc/release-notes.xml

@@ -0,0 +1,206 @@
+<?xml version="1.0"?>
+<!DOCTYPE book
+    PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+    "http://www.docbook.org/xml/4.3/docbook-xml-4.3.zip"
+[
+]>
+
+<article><title>Nixpkgs Release Notes</title>
+
+
+<section><title>Release 0.9 (January 31, 2006)</title>
+
+<para>There have been zillions of changes since the last release of
+Nixpkgs.  Many packages have been added or updated.  The following are
+some of the more notable changes:</para>
+
+<itemizedlist>
+
+  <listitem><para>Distribution files have been moved to <ulink
+  url="http://nix.cs.uu.nl/" />.</para></listitem>
+
+  <listitem><para>The C library on Linux, Glibc, has been updated to
+  version 2.3.6.</para></listitem>
+
+  <listitem><para>The default compiler is now GCC 3.4.5.  GCC 4.0.2 is
+  also available.</para></listitem>
+
+  <listitem><para>The old, unofficial Xlibs has been replaced by the
+  official modularised X11 distribution from X.org, i.e., X11R7.0.
+  X11R7.0 consists of 287 (!) packages, all of which are in Nixpkgs
+  though not all have been tested.  It is now possible to build a
+  working X server (previously we only had X client libraries).  We
+  use a fully Nixified X server on NixOS.</para></listitem>
+
+  <listitem><para>The Sun JDK 5 has been purified, i.e., it doesn't
+  require any non-Nix components such as
+  <filename>/lib/ld-linux.so.2</filename>.  This means that Java
+  applications such as Eclipse and Azureus can run on
+  NixOS.</para></listitem>
+
+  <listitem><para>Hardware-accelerated OpenGL support, used by games
+  like Quake 3 (which is now built from source).</para></listitem>
+
+  <listitem><para>Improved support for FreeBSD on
+  x86.</para></listitem>
+
+  <listitem><para>Improved Haskell support; e.g., the GHC build is now
+  pure.</para></listitem>
+
+  <listitem><para>Some support for cross-compilation: cross-compiling
+  builds of GCC and Binutils, and cross-compiled builds of the C
+  library uClibc.</para></listitem>
+
+  <listitem><para>Notable new packages:
+
+    <itemizedlist>
+
+      <listitem><para>teTeX, including support for building LaTeX
+      documents using Nix (with automatic dependency
+      determination).</para></listitem>
+      
+      <listitem><para>Ruby.</para></listitem>
+
+      <listitem><para>System-level packages to support NixOS,
+      e.g. Grub, GNU <literal>parted</literal> and so
+      on.</para></listitem>
+
+      <listitem><para><literal>ecj</literal>, the Eclipse Compiler for
+      Java, so we finally have a freely distributable compiler that
+      supports Java 5.0.</para></listitem>
+
+      <listitem><para><literal>php</literal>.</para></listitem>
+
+      <listitem><para>The GIMP.</para></listitem>
+
+      <listitem><para>Inkscape.</para></listitem>
+
+      <listitem><para>GAIM.</para></listitem>
+
+      <listitem><para><literal>kdelibs</literal>.  This allows us to
+      add KDE-based packages (such as
+      <literal>kcachegrind</literal>).</para></listitem>
+
+    </itemizedlist>
+
+  </para></listitem>
+
+</itemizedlist>
+
+<para>The following people contributed to this release:
+
+  Andres Löh,
+  Armijn Hemel,
+  Bogdan Dumitriu,
+  Christof Douma,
+  Eelco Dolstra,
+  Eelco Visser,
+  Mart Kolthof,
+  Martin Bravenboer,
+  Rob Vermaas and
+  Roy van den Broek.
+
+</para>
+
+</section>
+
+
+<section><title>Release 0.8 (April 11, 2005)</title>
+
+<para>This release is mostly to remain synchronised with the changed
+hashing scheme in Nix 0.8.</para>
+
+<para>Notable updates:
+
+<itemizedlist>
+
+  <listitem><para>Adobe Reader 7.0</para></listitem>
+
+  <listitem><para>Various security updates (zlib 1.2.2, etc.)</para></listitem>
+
+</itemizedlist>
+
+</para>
+
+</section>
+
+
+<section><title>Release 0.7 (March 14, 2005)</title>
+
+<itemizedlist>
+
+<listitem>
+
+  <para>The bootstrap process for the standard build
+  environment on Linux (stdenv-linux) has been improved.  It is no
+  longer dependent in its initial bootstrap stages on the system
+  Glibc, GCC, and other tools.  Rather, Nixpkgs contains a statically
+  linked bash and curl, and uses that to download other statically
+  linked tools.  These are then used to build a Glibc and dynamically
+  linked versions of all other tools.</para>
+
+  <para>This change also makes the bootstrap process faster.  For
+  instance, GCC is built only once instead of three times.</para>
+
+  <para>(Contributed by Armijn Hemel.)</para>
+
+</listitem>
+
+<listitem>
+
+  <para>Tarballs used by Nixpkgs are now obtained from the same server
+  that hosts Nixpkgs (<ulink url="http://catamaran.labs.cs.uu.nl/" />).
+  This reduces the risk of packages being unbuildable due to moved or
+  deleted files on various servers.</para>
+
+</listitem>
+
+<listitem>
+
+  <para>There now is a generic mechanism for building Perl modules.
+  See the various Perl modules defined in
+  pkgs/system/all-packages-generic.nix.</para>
+
+</listitem>
+
+<listitem>
+
+  <para>Notable new packages:
+
+  <itemizedlist>
+
+    <listitem><para>Qt 3</para></listitem>
+    <listitem><para>MySQL</para></listitem>
+    <listitem><para>MythTV</para></listitem>
+    <listitem><para>Mono</para></listitem>
+    <listitem><para>MonoDevelop (alpha)</para></listitem>
+    <listitem><para>Xine</para></listitem>
+
+  </itemizedlist>
+
+  </para>
+
+</listitem>
+
+<listitem>
+
+  <para>Notable updates:
+
+  <itemizedlist>
+
+    <listitem><para>GCC 3.4.3</para></listitem>
+    <listitem><para>Glibc 2.3.4</para></listitem>
+    <listitem><para>GTK 2.6</para></listitem>
+
+  </itemizedlist>
+
+  </para>
+
+</listitem>
+
+</itemizedlist>
+
+</section>
+
+  
+</article>

doc/style.css

@@ -0,0 +1,234 @@
+/* Copied from http://bakefile.sourceforge.net/, which appears
+   licensed under the GNU GPL. */
+
+
+/***************************************************************************
+                             Basic headers and text:
+ ***************************************************************************/
+
+body
+{
+    font-family: sans-serif;
+    background: white;
+  
+    margin: 2em 1em 2em 1em;
+}
+
+h1,h2,h3
+{
+    color: #005aa0;
+    text-align: left;
+}
+
+h1 /* title */
+{
+    font-size: 200%;
+}
+
+h2 /* chapters, appendices, subtitle */
+{
+    font-size: 180%;
+}
+
+/* Extra space between chapters, appendices. */
+div.chapter > div.titlepage h2, div.appendix > div.titlepage h2 
+{ 
+    margin-top: 1.5em;
+/*    border-top: solid #005aa0; */
+}
+
+div.sect1 h2 /* sections */
+{
+    font-size: 150%;
+}
+
+div.refnamediv h2, div.refsynopsisdiv h2, div.refsection h2 /* refentry parts */
+{
+    font-size: 125%;
+}
+
+div.refsection h3
+{
+    font-size: 110%;
+}
+
+h3 /* subsections */
+{
+    font-size: 125%;
+}
+
+
+
+/***************************************************************************
+                               Program listings:
+ ***************************************************************************/
+
+div.example
+{
+    border: 1px solid #6185a0;
+    padding: 6px 6px;
+    margin-left: 3em;
+    margin-right: 3em;
+    background: #eeeeee;
+}
+
+pre.programlisting
+{
+    color: #600000;
+    font-family: monospace;
+}
+
+
+/***************************************************************************
+                            Screen dumps:
+ ***************************************************************************/
+
+pre.screen
+{
+    border: 1px solid #6185a0;
+    padding: 6px 6px;
+    margin-left: 3em;
+    margin-right: 3em;
+    color: #600000;
+    background: #eeeeee;
+    font-family: monospace;
+    /* font-size: 90%; */
+}
+
+
+/***************************************************************************
+                               Notes, warnings etc:
+ ***************************************************************************/
+
+.note,.warning
+{
+    margin-top: 1em;
+    margin-bottom: 1em;
+    border: 1px solid #6185a0;
+    padding: 0px 1em;
+    background: #fffff5;
+}
+
+div.note,div.warning
+{
+    font-style: italic;
+}
+
+div.warning h3
+{
+    color: red;
+    font-size: 100%;
+}
+
+div.note h3
+{
+    color: blue;
+    font-size: 100%;
+}
+
+div.navfooter *
+{
+    font-size: 90%;
+}
+
+
+/***************************************************************************
+                        Links colors and highlighting: 
+ ***************************************************************************/
+
+a:link { color: #0048b3; }
+a:visited { color: #002a6a; }
+a:hover { background: #ffffcd; }
+
+
+/***************************************************************************
+                              Table of contents:
+ ***************************************************************************/
+
+.toc
+{
+    font-size: 90%;
+}
+
+
+
+/***************************************************************************
+                               Special elements:
+ ***************************************************************************/
+
+tt, code
+{
+    color: #400000;
+}
+
+.term
+{
+    font-weight: bold;
+    
+}
+
+div.variablelist dd
+{
+    margin-bottom: 1em;
+}
+
+.default
+{
+    font-style: italic;
+}
+
+.availability
+{
+    font-style: italic;
+}
+
+.varname
+{
+    color: #400000;
+}
+
+
+div.informaltable table
+{
+  border: 1px solid #6185a0;
+  width: 100%;
+}
+
+div.informaltable td
+{
+  border: 0;
+  padding: 5px;
+}
+
+div.informaltable td.default
+{
+  text-align: right;
+}
+
+div.informaltable th
+{
+  text-align: left;
+  color: #005aa0;
+  border: 0;
+  padding: 5px;
+  background: #fffff5;
+  font-weight: normal;
+  font-style: italic;
+}
+
+td.varname, td.tagname, td.paramname
+{
+  font-weight: bold;
+  vertical-align: top;
+}
+
+div.epigraph
+{
+    font-style: italic;
+    text-align: right;
+}
+
+table.productionset table.productionset
+{
+    font-family: monospace;
+}

maintainers/docs/bugs.txt

@@ -0,0 +1,62 @@
+* If NIX_DEBUG is turned on (set to "1"), autoconf configure scripts
+  may fail to find the correct preprocessor:
+
+    checking how to run the C preprocessor... /lib/cpp
+
+
+* When building gcc using a Nix gcc, generated libraries link against
+  the libraries of the latter:
+
+    $ ldd /nix/store/3b1d3995c4edbf026be5c73f66f69245-gcc-3.3.3/lib/libstdc++.so
+    ...
+    libgcc_s.so.1 => /nix/store/1f19e61d1b7051f1131f78b41b2a0e7e-gcc-3.3.2/lib/libgcc_s.so.1 (0x400de000)
+    (wrong! should be .../3b1d.../lib/libgcc_s...)
+    ...
+
+
+* In libXt:
+
+/bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.     -DXTHREADS -DXUSE_MTSAFE_API -I/nix/store/aadf0bd4a908da11d14f6538503b8408-libX11-6.2.1/include -I/nix/store/ba366e3b944ead64ec9b0490bb615874-xproto-6.6.1/include   -I./include/X11 -g -O2 -c -o ActionHook.lo `test -f 'ActionHook.c' || echo './'`ActionHook.c
+mkdir .libs
+ gcc -DHAVE_CONFIG_H -I. -I. -I. -DXTHREADS -DXUSE_MTSAFE_API -I/nix/store/aadf0bd4a908da11d14f6538503b8408-libX11-6.2.1/include -I/nix/store/ba366e3b944ead64ec9b0490bb615874-xproto-6.6.1/include -I./include/X11 -g -O2 -c ActionHook.c  -fPIC -DPIC -o .libs/ActionHook.o
+In file included from IntrinsicI.h:55,
+                 from ActionHook.c:69:
+include/X11/IntrinsicP.h:54:27: X11/Intrinsic.h: No such file or directory
+
+
+* Then:
+
+ gcc -DHAVE_CONFIG_H -I. -I. -I. -DXTHREADS -DXUSE_MTSAFE_API -I/nix/store/aadf0bd4a908da11d14f6538503b8408-libX11-6.2.1/include -I/nix/store/ba366e3b944ead64ec9b0490bb615874-xproto-6.6.1/include -I./include -I./include/X11 -g -O2 -c ActionHook.c  -fPIC -DPIC -o .libs/ActionHook.o
+In file included from IntrinsicI.h:55,
+                 from ActionHook.c:69:
+include/X11/IntrinsicP.h:202:25: X11/ObjectP.h: No such file or directory
+
+(moved to include/X11; should edit include/Makefile.am)
+
+
+* `ld' on Mac OS X barfs if the timestamp on static libraries has
+  changed (which happens if they are installed through a substitute).
+
+  Typical error:
+
+  /usr/bin/ld: table of contents for archive: libATerm.a is out of
+  date; rerun ranlib(1) (can't load from it)
+
+  Solution: patch ld.
+
+  Non-solution: extend NAR file format to include timestamps.  We
+  don't want that because they introduce a source of non-determinism.
+  To catch problems like this one determistically, we should change
+  the timestamp on store objects to 0.
+
+
+* In gtksourceview-sharp: does the prefix patch cause problems (e.g.,
+  makefile.am says "mimeinfodir should be the same as the gnome
+  prefix")?
+
+
+* fgrep/egrep: these fail if grep is not in the $PATH.
+
+
+* teTeX: some programs (such as epstopdf) depend on /usr/bin/env, and
+  expect perl to be in the environment.

maintainers/docs/classification.txt

@@ -0,0 +1,116 @@
+* Classification scheme for packages
+
+- many packages fall under several categories; what matters is the
+  *primary* purpose of a package.  For example, the libxml2 package
+  builds both a library and some tools; but it's a library foremost,
+  so it goes under ./development/libraries. 
+
+- when in doubt, refactor.
+
+IF it's used to support SOFTWARE DEVELOPMENT:
+
+  IF it's a LIBRARY used by other packages:
+    IF it's directly related to GTK:
+      ./development/libraries/gtk+
+    ELSE
+      ./development/libraries
+      (e.g., libxml2)
+  ELSE IF it's a COMPILER:
+    ./development/compilers
+    (e.g., gcc)
+  ELSE IF it's an INTERPRETER:
+    ./development/interpreters
+  ELSE IF it's a development TOOL (or set of):
+    IF it's a PARSER GENERATOR (incl. lexers):
+      ./development/tools/parsing
+      (e.g., bison, flex)
+    ELSE IF it's a BUILD MANAGER:
+      ./development/tools/build-managers
+      (e.g., gnumake
+    ELSE
+      ./development/tools/misc
+      (e.g., binutils)
+  ELSE
+    ./development/misc
+
+ELSE IF it's a TOOL (or set of):
+  # a tool is a relatively *small* program, esp. one intented to be
+  # used non-interactively
+
+  IF it's for NETWORKING:
+    ./tools/networking
+    (e.g., wget)
+  ELSE IF it's for TEXT PROCESSING:
+    ./tools/text
+    (e.g., diffutils)
+  ELSE IF it's a SYSTEM utility, i.e., something related or essential
+    to the operation of a system:
+    ./tools/system
+    (e.g., init)
+  ELSE IF it's an ARCHIVER (which may include a compression function):
+    ./tools/archivers
+    (e.g., zip, tar)
+  ELSE IF it's a COMPRESSION program:
+    ./tools/compression
+    (e.g., gzip, bzip2)
+  ELSE IF it's a SECURITY program:
+    ./tools/security
+    (e.g., nmap, gnupg)
+  ELSE
+    ./tools/misc
+
+ELSE IF it's a SHELL:
+
+  ./shells
+
+ELSE IF it's a SERVER:
+
+  IF it's a HTTP server:
+    ./servers/http
+    (e.g., apache)
+  IF it's a X11 server:
+    ./servers/x11
+    (e.g., xfree86)
+  ELSE
+    ./servers/misc
+
+ELSE IF it's a DESKTOP ENVIRONMENT (incl. WINDOW MANAGERS):
+
+  ./desktops
+  (e.g., kde, gnome, fvwm)
+
+ELSE IF it's an APPLICATION:
+  # a (typically large) program with a distinct user interface,
+  # primarily used interactively
+
+  IF it's a VERSION MANAGEMENT system:
+    ./applications/version-management
+  ELSE IF it's for VIDEO playback/etc:
+    ./applications/video
+  ELSE IF it's for GRAPHICS viewing/editing/etc:
+    ./applications/graphics
+  ELSE IF it's for NETWORKING:
+    IF it's a MAILREADER:
+      ./applications/networking/mailreaders
+    IF it's a NEWSREADER:
+      ./applications/networking/newsreaders
+    ELSE
+      ./applications/networking/misc
+  ELSE
+    ./applications/misc
+
+ELSE IF it's DATA (i.e., does not have a straight-forward executable semantics):
+
+  IF it's related to SGML/XML processing:
+    IF it's a XML DTD:
+      ./data/sgml+xml/schemas/xml-dtd
+    ELSE IF it's an XSLT stylesheet (okay, these are executable...):
+      ./data/sgml+xml/stylesheets/xslt
+
+ELSE IF it's a GAME:
+
+  ./games
+
+ELSE:
+
+  ./misc

maintainers/docs/cross.txt

@@ -0,0 +1,331 @@
+Setting up a cross compiler with Nix
+
+"Cross compilation" means compiling a program on one machine for another
+type of machine. A typical use of cross compilation is to compile programs
+for embedded devices. These devices often don't have the computing power
+and memory to compile programs natively.
+
+For a fully working cross compiler the following are needed:
+
+* cross binutils: assembler, archiver, linker, etcetera that understand
+the format of the target system
+
+* cross compiler: a compiler that can generate binary code and object files
+for the target platform
+
+* cross C library: a library to link object files with to create fully
+functional programs
+
+Cross compilers are difficult to set up. A lot of people report that they
+cannot succeed in building a cross toolchain successfully. The answers
+usually consist of "download this pre-built toolchain", which is equally
+unhelpful.
+
+A toolchain is set up in five steps:
+
+1. build binutils to that can run on the host platform, but generate code
+for the target platform
+
+2. build Linux kernel headers for the target platform
+
+3. build a minimal C only version of GCC, that can run on the host platform
+and generate code for the target platform
+
+4. build a C library for the target platform. This includes the dynamic
+linker, C library, etc.
+
+5. build a full GCC
+
+****
+NB:
+
+Keep in mind that many programs are not very well suited for cross
+compilation. Either they are not intended to run on other platforms,
+because the code is highly platform specific, or the configuration proces
+is not written with cross compilation in mind.
+
+Nix will not solve these problems for you!
+***
+
+This document describes to set up a cross compiler to generate code for
+arm-linux with uClibc and runs on i686-linux. The "stdenv" used is the
+default from the standard Nix packages collection.
+
+Step 1: build binutils for arm-linux in the stdenv for i686-linux
+
+---
+{stdenv, fetchurl, noSysDirs}:
+
+stdenv.mkDerivation {
+  name = "binutils-2.16.1-arm";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://ftp.nluug.nl/gnu/binutils/binutils-2.16.1.tar.bz2;
+    md5 = "6a9d529efb285071dad10e1f3d2b2967";
+  };
+  inherit noSysDirs;
+  configureFlags = "--target=arm-linux";
+}
+---
+
+This will compile binutils that will run on i686-linux, but knows the
+format used by arm-linux.
+
+Step 2: build kernel headers for the target architecture
+
+  default.nix for kernel-headers-arm:
+
+---
+{stdenv, fetchurl}:
+
+assert stdenv.system == "i686-linux";
+
+stdenv.mkDerivation {
+  name = "linux-headers-2.6.13.4-arm";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.13.4.tar.bz2;
+    md5 = "94768d7eef90a9d8174639b2a7d3f58d";
+  };
+}
+---
+
+  builder.sh for kernel-headers-arm:
+
+---
+source $stdenv/setup
+
+
+buildPhase() {
+    make include/linux/version.h
+}
+
+buildPhase=buildPhase
+
+
+installPhase() {
+    mkdir $out
+    mkdir $out/include
+    #cd $out/include
+    #ln -s asm-arm asm
+    make include/asm ARCH=arm
+    cp -prvd include/linux include/asm include/asm-arm include/asm-generic $out/include
+    echo -n > $out/include/linux/autoconf.h
+}
+
+installPhase=installPhase
+
+
+genericBuild
+---
+
+Step 3: build a minimal GCC
+
+Extra/different parameters include the target platform and the kernel
+headers argument (this needs a major cleanup, as well as the name, it
+needs to be different!). Profiled compilers are disabled. The tarball
+used here is just gcc-core. For some reason it doesn't install nicely
+if the whole tarball is used (or is this some braino on my side? -- AH).
+
+Only C is used, because for other languages (such as C++) extra libraries
+need to be compiled, for which libraries compiled for the target system
+are needed.
+
+There is a bit of evilness going on. The cross compiled utilities need
+to be either copied to or be linked from the output tree of the compiler.
+(Is this really true? Back this up with arguments! -- AH)
+
+Symbolic links are not something we want inside the Nix store.
+
+---
+{ stdenv, fetchurl, noSysDirs
+, langC ? true, langCC ? true, langF77 ? false
+, profiledCompiler ? false
+, binutilsArm
+, kernelHeadersArm
+}:
+
+assert langC;
+
+stdenv.mkDerivation {
+  name = "gcc-4.0.2-arm";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = ftp://ftp.nluug.nl/pub/gnu/gcc/gcc-4.0.2/gcc-core-4.0.2.tar.bz2;
+    md5 = "f7781398ada62ba255486673e6274b26";
+    #url = ftp://ftp.nluug.nl/pub/gnu/gcc/gcc-4.0.2/gcc-4.0.2.tar.bz2;
+    #md5 = "a659b8388cac9db2b13e056e574ceeb0";
+  };
+  # !!! apply only if noSysDirs is set
+  patches = [./no-sys-dirs.patch ./gcc-inhibit.patch];
+  inherit noSysDirs langC langCC langF77 profiledCompiler;
+  buildInputs = [binutilsArm];
+  inherit kernelHeadersArm binutilsArm;
+  platform = "arm-linux";
+}
+---
+
+The builder.sh for a cross-compiler. Note that the binutils are prefixed
+with the architecture name, so arm-linux-ld instead of ld, etc. This is
+necessary because when we cross-compile a lot of programs look for these
+tools with these specific names. The standard gcc-wrapper does not take this
+into account yet.
+
+---
+source $stdenv/setup
+
+
+export NIX_FIXINC_DUMMY=$NIX_BUILD_TOP/dummy
+mkdir $NIX_FIXINC_DUMMY
+
+
+if test "$noSysDirs" = "1"; then
+
+    if test "$noSysDirs" = "1"; then
+        # Figure out what extra flags to pass to the gcc compilers
+        # being generated to make sure that they use our glibc.
+        if test -e $NIX_GCC/nix-support/orig-glibc; then
+            glibc=$(cat $NIX_GCC/nix-support/orig-glibc)
+            # Ugh.  Copied from gcc-wrapper/builder.sh.  We can't just
+            # source in $NIX_GCC/nix-support/add-flags, since that
+            # would cause *this* GCC to be linked against the
+            # *previous* GCC.  Need some more modularity there.
+            extraCFlags="-B$glibc/lib -isystem $glibc/include"
+            extraLDFlags="-B$glibc/lib -L$glibc/lib -Wl,-s \
+              -Wl,-dynamic-linker,$glibc/lib/ld-linux.so.2"
+
+            # Oh, what a hack.  I should be shot for this.
+            # In stage 1, we should link against the previous GCC, but
+            # not afterwards.  Otherwise we retain a dependency.
+            # However, ld-wrapper, which adds the linker flags for the
+            # previous GCC, is also used in stage 2/3.  We can prevent
+            # it from adding them by NIX_GLIBC_FLAGS_SET, but then
+            # gcc-wrapper will also not add them, thereby causing
+            # stage 1 to fail.  So we use a trick to only set the
+            # flags in gcc-wrapper.
+            hook=$(pwd)/ld-wrapper-hook
+            echo "NIX_GLIBC_FLAGS_SET=1" > $hook
+            export NIX_LD_WRAPPER_START_HOOK=$hook
+        fi
+
+        export NIX_EXTRA_CFLAGS=$extraCFlags
+        export NIX_EXTRA_LDFLAGS=$extraLDFlags
+        export CFLAGS=$extraCFlags
+        export CXXFLAGS=$extraCFlags
+        export LDFLAGS=$extraLDFlags
+    fi
+
+else
+    patches=""
+fi
+
+
+preConfigure=preConfigure
+preConfigure() {
+    
+    # Determine the frontends to build.
+    langs="c"
+    if test -n "$langCC"; then
+        langs="$langs,c++"
+    fi
+    if test -n "$langF77"; then
+        langs="$langs,f77"
+    fi
+
+    # Cross compiler evilness
+    ensureDir $out
+    ensureDir $out/arm-linux
+    ensureDir $out/arm-linux/bin
+    ln -s $binutilsArm/arm-linux/bin/as $out/arm-linux/bin/as
+    ln -s $binutilsArm/arm-linux/bin/ld $out/arm-linux/bin/ld
+    ln -s $binutilsArm/arm-linux/bin/ar $out/arm-linux/bin/ar
+    ln -s $binutilsArm/arm-linux/bin/ranlib $out/arm-linux/bin/ranlib
+
+    # Perform the build in a different directory.
+    mkdir ../build
+    cd ../build
+
+    configureScript=../$sourceRoot/configure
+    configureFlags="--enable-languages=$langs --target=$platform --disable-threads --disable-libmudflap --disable-shared --with-headers=$kernelHeadersArm/include --disable-multilib"
+}
+
+
+postInstall=postInstall
+postInstall() {
+    # Remove precompiled headers for now.  They are very big and
+    # probably not very useful yet.
+    find $out/include -name "*.gch" -exec rm -rf {} \; -prune
+
+    # Remove `fixincl' to prevent a retained dependency on the
+    # previous gcc.
+    rm -rf $out/libexec/gcc/*/*/install-tools
+}
+
+
+#if test -z "$profiledCompiler"; then
+    #makeFlags="bootstrap"
+#else    
+    #makeFlags="profiledbootstrap"
+#fi
+
+genericBuild
+---
+
+Step 4: build a C library for the target platform.
+
+The previous steps are enough to compile a C library. In our case we take
+uClibc. It's intended to be a small sized replacement for glibc. It is widely
+used in embedded environments.
+
+...
+
+Step 5: Build a compiler to link with the newly built C library.
+
+...
+
+If we restrict the compiler to just C programs it is relatively easy,
+since we only need to wrap the GCC we built in the previous step with all
+the right tools and the right C library. Successfully compiled programs with
+this compiler and verified to be working on a HP Jornada 820 running Linux
+are "patch", "make" and "wget".
+
+If we want to build C++ programs it gets a lot more difficult. GCC has a
+three step compilation proces. In the first step a simple compiler, called
+xgcc, that can compile only C programs is built. With that compiler it
+compiles itself two more times: one time to build a full compiler, and another
+time to build a full compiler once again with the freshly built compiler from
+step 2. In the second and third step support for C++ is compiled, if this
+is configured.
+
+One of the libraries that has to be built for C++ support step is libstdc++.
+This library uses xgcc, even when cross compiling, since libstdc++ has to be
+compiled for arm-linux.
+
+One of the compiler flags that GCC uses for this compiler is called X_CFLAGS.
+This is used by the Nix build process to set the dynamic linker, glibc
+in the case of i686-linux using the default Nix packages collection.
+
+Obiously, since we need to compile libstc++ for arm-linux with uClibc linking
+will not be done correctly: you can't link object files built for arm-linux
+with a glibc built for i686-linux.
+
+Setting X_CFLAGS to use the uClibc libraries and dynamic linker will fail
+too. Earlier on in the build process these flags are used to compile important
+files like libgcc.a by the host system gcc, which does need to be linked
+to glibc. To make this work correctly you will need to carefully juggle
+with compilation flags. This is still work in progress for Nix.
+
+
+---
+
+After succesfully completing the whole toolchain you can start building
+packages with the newly built tools. To make everything build correctly
+you will need a stdenv for your target platform. Setting up this platform
+will take some effort. Right now there is a very experimental setup for
+arm-linux, which needs to be cleaned up before it is production ready.
+
+Please note that many packages are not well suited for cross-compilation.
+Even though the package itself might be very well portable often the
+buildscripts are not. One thing that we have seen that causes frequent
+build failures is the use of the LD variable. This is often set to 'ld'
+and not $(CROSS)-ld.

maintainers/docs/static-initial-env

@@ -0,0 +1,32 @@
+Upgrading the standard initial environment
+
+For Nix on i686-linux we make use of an environment of statically linked
+tools (see $nixpkgs/stdenv/linux). The first version of these tools were
+compiled outside of Nix, in an impure environment. They are used as some
+magical ingredient to make everything work. To keep these tools more in
+synchronization with the rest of nixpkgs and to make porting of nixpkgs
+to other platforms easier the static versions are now also built with Nix
+and nixpkgs.
+
+The tools can be found in nixpkgs in:
+
+- shells/bash-static
+- tools/networking/curl-diet
+- tools/archivers/gnutar-diet
+- tools/compression/gzip-diet
+- tools/compression/bzip2-static
+- tools/text/gnused-diet
+- tools/text/diffutils-diet
+- tools/text/gnupatch-diet
+- tools/misc/findutils-static
+
+Most packages are compiled with dietlibc, an alternate C library, apart
+from bash and findutils, which are statically linked to glibc. The reason
+we chose dietlibc has various reasons. First of all, curl cannot be built
+statically with glibc. If we do, we get a static binary, but it cannot resolve
+hostnames to IP addresses. glibc dynamically loads functionality at runtime
+to do resolving. When linking with dietlibc this doesn't happen.
+
+The static tools are not used as part of the input hashing (see Eelco's
+PhD thesis, paragraph 5.4.1), so changing them does not change anything and
+will not force a massive rebuild.

maintainers/docs/todo.txt

@@ -0,0 +1,14 @@
+* Patch development/tools/misc/libtool not to search standard
+  directories for libraries (like setup.sh does now). [do we want
+  this?]
+
+* In setup.sh: add configureFlagsArray or something
+
+* Inform freedesktop people that Xaw requires Xpm.
+
+* After building gcc, filter out references to /tmp/nix... in
+  .../lib/libsupc++.la and .../lib/libstdc++.la
+
+* Add gettext to glib propagatedBuildInputs?  Glib's `gi18n.h' doesn't
+  seem to like Glibc `libintl.h'; needs the gettext one instead.
+  [Move from libbonoboui]

maintainers/docs/uclibc-cross.txt

@@ -0,0 +1,27 @@
+Adding uClibc support for a new platform
+
+Sometimes you want to cross-compile to another architecture, for example an
+embedded devices. For embedded devices the uClibc C library is popular.
+In Nixpkgs there is support for uClibc for several architectures but not
+everything is supported.
+
+Adding support is not very difficult, 
+
+* Add your architecture to the buildfiles in
+$nixpkgs/development/tools/misc/binutils-cross
+
+* Add your architecture to the buildfiles in
+$nixpkgs/development/compilers/gcc-4.0-cross
+
+* Add your architecture to the buildfiles in
+$nixpkgs/os-specific/linux/kernel-headers-cross
+
+* Add your architecture to the buildfiles in
+$nixpkgs/development/uclibc
+
+In the latter directory you will also need a configuration file for uClibc.
+You can make these by unpacking the uClibc sources and run a "make menuconfig".
+In the configuration a few things need to be adapted:
+
+- kernel sources -> need to point at our own kernel headers
+- install -> needs to point at $out

maintainers/scripts/evacuate-urls.sh

@@ -0,0 +1,36 @@
+#! /bin/sh -e
+
+find . -name "*.nix" | while read fn; do
+
+    grep -E '^ *url = ' "$fn" | while read line; do
+
+        if oldURL=$(echo "$line" | sed 's^url = \(.*\);^\1^'); then
+
+            if ! echo "$oldURL" | grep -q -E "www.cs.uu.nl|nix.cs.uu.nl|.stratego-language.org|java.sun.com|ut2004|linuxq3a|RealPlayer|Adbe"; then
+                base=$(basename $oldURL)
+                newURL="http://nix.cs.uu.nl/dist/tarballs/$base"
+                newPath="/data/webserver/dist/tarballs/$base"
+                echo "$fn: $oldURL -> $newURL"
+
+#		if test -e "$newPath"; then
+#		    echo "WARNING: $newPath exists!"
+#		else
+
+		    if ! test -e "$newPath"; then
+			curl --fail --location --max-redirs 20 "$oldURL" > "$newPath".tmp
+			mv -f "$newPath".tmp "$newPath"
+
+		    fi
+
+		    sed "s^$oldURL^$newURL^" < "$fn" > "$fn".tmp
+		    mv -f "$fn".tmp "$fn"
+
+#		fi
+
+            fi
+            
+        fi
+    
+    done
+
+done

pkgs/applications/audio/cdparanoia/default.nix

@@ -0,0 +1,11 @@
+{stdenv, fetchurl}:
+
+stdenv.mkDerivation {
+  name = "cdparanoia-III-alpha9.8";
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/cdparanoia-III-alpha9.8.src.tgz;
+    md5 = "7218e778b5970a86c958e597f952f193" ;
+  };
+  
+  patches = [./fix.patch];
+}

pkgs/applications/audio/cdparanoia/fix.patch

@@ -0,0 +1,46 @@
+*** cdparanoia-III-alpha9.8/interface/utils.h	Thu Apr 20 00:41:04 2000
+--- cdparanoia-III-alpha9.8-old/interface/utils.h	Wed Jan 19 21:44:08 2005
+***************
+*** 110,117 ****
+      case CDDA_MESSAGE_LOGIT:
+        d->errorbuf=catstring(d->errorbuf,s);
+        break;
+-     case CDDA_MESSAGE_FORGETIT:
+-     default:
+      }
+    }
+  }
+--- 110,115 ----
+***************
+*** 125,132 ****
+      case CDDA_MESSAGE_LOGIT:
+        d->messagebuf=catstring(d->messagebuf,s);
+        break;
+-     case CDDA_MESSAGE_FORGETIT:
+-     default:
+      }
+    }
+  }
+--- 123,128 ----
+***************
+*** 167,174 ****
+  	}
+        }
+        break;
+-     case CDDA_MESSAGE_FORGETIT:
+-     default:
+      }
+    }
+    if(malloced)free(buffer);
+--- 163,168 ----
+***************
+*** 203,210 ****
+  	if(!malloced)*messages=catstring(*messages,"\n");
+  	}
+        break;
+-     case CDDA_MESSAGE_FORGETIT:
+-     default:
+      }
+    }
+    if(malloced)free(buffer);
+--- 197,202 ----

pkgs/applications/audio/flac/default.nix

@@ -0,0 +1,11 @@
+{stdenv, fetchurl, libogg}:
+
+stdenv.mkDerivation {
+  name = "flac-1.1.1";
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/flac-1.1.1.tar.gz;
+    md5 = "c6ccddccf8ad344065698047c2fc7280" ;
+  };
+
+  buildInputs = [libogg] ;
+}

pkgs/applications/audio/lame/default.nix

@@ -0,0 +1,9 @@
+{stdenv, fetchurl}:
+
+stdenv.mkDerivation {
+  name = "lame-3.96.1";
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/lame-3.96.1.tar.gz;
+    md5 = "e1206c46a5e276feca11a7149e2fc6ac" ;
+  };
+}

pkgs/applications/audio/xmms/default.nix

@@ -0,0 +1,14 @@
+{stdenv, fetchurl, alsaLib, esound, libogg, libvorbis, glib, gtk}:
+
+stdenv.mkDerivation {
+  name = "xmms-1.2.10";
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/xmms-1.2.10.tar.bz2;
+    md5 = "03a85cfc5e1877a2e1f7be4fa1d3f63c" ;
+  };
+
+  # Patch borrowed from SuSE 10.0 to fix pause/continue on ALSA.
+  patches = [./alsa.patch];
+
+  buildInputs = [alsaLib esound libogg libvorbis glib gtk];
+}

pkgs/applications/editors/eclipse/builder.sh

@@ -0,0 +1,37 @@
+source $stdenv/setup
+source $makeWrapper
+
+unpackFile $src 
+ensureDir $out
+mv eclipse $out/
+
+# Unpack the jars that contain .so files.
+#echo "unpacking some jars..."
+#for i in $(find $out -name "*.linux*.jar"); do
+#    echo $i
+#    cd $(dirname $i) && $jdk/bin/jar -x < $i
+#    rm $i
+#done
+
+# Set the dynamic linker and RPATH.
+rpath=
+for i in $libraries; do
+    rpath=$rpath${rpath:+:}$i/lib
+done
+glibc=$(cat $NIX_GCC/nix-support/orig-glibc)
+find $out \( -type f -a -perm +0100 \) \
+    -print \
+    -exec patchelf --interpreter $glibc/lib/ld-linux.so.* \
+    --set-rpath "$rpath" {} \;
+#find $out \( -type f -a -name "*.so*" \) \
+#    -print \
+#    -exec patchelf --set-rpath "$rpath" {} \;
+
+# Make a wrapper script so that the proper JDK is found.
+makeWrapper $out/eclipse/eclipse $out/bin/eclipse \
+    --prefix PATH ":" "$jdk/bin" \
+    --prefix LD_LIBRARY_PATH ":" "$rpath"
+
+for i in $plugins; do
+    cp $i $out/eclipse/plugins
+done

pkgs/applications/editors/eclipse/default.nix

@@ -0,0 +1 @@
+import ./eclipse-sdk-3.1.1.nix

pkgs/applications/editors/eclipse/eclipse-sdk-3.1.1.nix

@@ -0,0 +1,18 @@
+{fetchurl, stdenv, makeWrapper, jdk, gtk, glib, libXtst, plugins ? []}:
+
+let {
+  body =
+    stdenv.mkDerivation {
+      name = "eclipse-sdk-3.1.1";
+      builder = ./builder.sh;
+      src = bindist;
+      inherit makeWrapper jdk plugins;
+      libraries = [gtk glib libXtst];
+   };
+
+  bindist = 
+    fetchurl {
+      url = http://nix.cs.uu.nl/dist/tarballs/eclipse-SDK-3.1.1-linux-gtk.tar.gz;
+      md5 = "a2ae61431657e2ed247867b9a9948290";
+    };
+}

pkgs/applications/editors/eclipse/eclipse-sdk-3.1.nix

@@ -0,0 +1,18 @@
+{fetchurl, stdenv, makeWrapper, jdk, gtk, glib, libXtst}:
+
+let {
+  body =
+    stdenv.mkDerivation {
+      name = "eclipse-sdk-3.1";
+      builder = ./builder.sh;
+      src = bindist;
+      inherit makeWrapper jdk;
+      libraries = [gtk glib libXtst];
+   };
+
+  bindist = 
+    fetchurl {
+      url = http://nix.cs.uu.nl/dist/tarballs/eclipse-SDK-3.1-linux-gtk.tar.gz;
+      md5 = "0441c11cc5af1e84ed3be322929899e8";
+    };
+}

pkgs/applications/editors/eclipse/plugins/spoofax/0.3.0.nix

@@ -0,0 +1,6 @@
+{stdenv, fetchurl}:
+
+fetchurl {
+  url = http://nix.cs.uu.nl/dist/tarballs/org.spoofax.editor_0.3.0.jar;
+  md5 = "ff66d229c774f840ec8285f64c0f95bc";
+}

pkgs/applications/editors/eclipse/plugins/spoofax/default.nix

@@ -0,0 +1,6 @@
+{stdenv, fetchurl}:
+
+fetchurl {
+  url = http://nix.cs.uu.nl/dist/tarballs/org.spoofax.editor_0.3.10.jar;
+  md5 = "ff77853e750e19a9b8d380c17ea27f3d";
+}

pkgs/applications/editors/emacs-22-aa/builder.sh

@@ -0,0 +1,13 @@
+source $stdenv/setup
+
+myglibc=`cat ${NIX_GCC}/nix-support/orig-glibc`
+echo "glibc: $myglibc" 
+
+postConfigure() {
+  cp $myglibc/lib/crt1.o src
+  cp $myglibc/lib/crti.o src
+  cp $myglibc/lib/crtn.o src
+}
+postConfigure=postConfigure
+
+genericBuild

pkgs/applications/editors/emacs-22-aa/crt.patch

@@ -0,0 +1,41 @@
+Only in emacs-21.3: configure.in~
+Only in emacs-21.3: patchfile
+Only in emacs-21.3/src: Makefile.in~
+diff -rc emacs-orig/src/s/gnu-linux.h emacs-21.3/src/s/gnu-linux.h
+*** emacs-orig/src/s/gnu-linux.h	2001-09-28 17:50:04.000000000 +0200
+--- emacs-21.3/src/s/gnu-linux.h	2004-10-06 13:13:19.000000000 +0200
+***************
+*** 173,179 ****
+  /* GNU/Linux usually has crt0.o in a non-standard place */
+  #define START_FILES pre-crt0.o /usr/lib/crt0.o
+  #else
+! #define START_FILES pre-crt0.o /usr/lib/crt1.o /usr/lib/crti.o
+  #endif
+  
+  #ifdef __ELF__
+--- 173,179 ----
+  /* GNU/Linux usually has crt0.o in a non-standard place */
+  #define START_FILES pre-crt0.o /usr/lib/crt0.o
+  #else
+! #define START_FILES pre-crt0.o crt1.o crti.o
+  #endif
+  
+  #ifdef __ELF__
+***************
+*** 225,231 ****
+  #else
+  #undef LIB_GCC
+  #define LIB_GCC
+! #define LIB_STANDARD -lgcc -lc -lgcc /usr/lib/crtn.o
+  #endif
+  
+  /* Don't use -g in test compiles in configure.
+--- 225,231 ----
+  #else
+  #undef LIB_GCC
+  #define LIB_GCC
+! #define LIB_STANDARD -lgcc -lc -lgcc crtn.o
+  #endif
+  
+  /* Don't use -g in test compiles in configure.
+Only in emacs-21.3/src/s: gnu-linux.h~

pkgs/applications/editors/emacs-22-aa/default.nix

@@ -0,0 +1,34 @@
+{ xawSupport ? true
+, xpmSupport ? true
+, xaw3dSupport ? false
+, gtkGUI ? false
+, xftSupport ? false
+, stdenv, fetchurl, x11, libXaw ? null, libXpm ? null, Xaw3d ? null
+, pkgconfig ? null, gtk ? null, libXft ? null, libpng ? null
+}:
+
+assert xawSupport -> libXaw != null;
+assert xpmSupport -> libXpm != null;
+assert xaw3dSupport -> Xaw3d != null;
+assert gtkGUI -> pkgconfig != null && gtk != null;
+assert xftSupport -> libXft != null && libpng != null; # libpng = probably a bug
+
+stdenv.mkDerivation {
+  name = "emacs-22.0.50-pre-xft";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/emacs-22.0.50-pre-xft.tar.bz2;
+    md5 = "4f96ada6f18513aeb70adc27b7ac862f";
+  };
+  patches = [./crt.patch];
+  buildInputs = [
+    x11
+    (if xawSupport then libXaw else null)
+    (if xpmSupport then libXpm else null)
+    (if xaw3dSupport then Xaw3d else null)
+  ]
+  ++ (if gtkGUI then [pkgconfig gtk] else [])
+  ++ (if xftSupport then [libXft libpng] else []);
+  configureFlags =
+    if gtkGUI then ["--with-x-toolkit=gtk" "--with-xft"] else [];
+}

pkgs/applications/editors/emacs-22-aa/modes/cua/builder.sh

@@ -0,0 +1,4 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+cp $src $out/emacs/site-lisp/cua.el

pkgs/applications/editors/emacs-22-aa/modes/cua/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "cua-mode-2.10";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/cua-mode-2.10.el;
+    md5 = "5bf5e43f5f38c8383868c7c6c5baca09";
+  };
+}

pkgs/applications/editors/emacs-22-aa/modes/haskell/builder.sh

@@ -0,0 +1,6 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+tar zxvf $src
+cp haskell-mode*/*.el $out/emacs/site-lisp
+cp haskell-mode*/*.hs $out/emacs/site-lisp

pkgs/applications/editors/emacs-22-aa/modes/haskell/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "haskell-mode-1.45";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/haskell-mode-1.45.tar.gz;
+    md5 = "c609998580cdb9ca8888c7d47d22ca3b";
+  };
+}

pkgs/applications/editors/emacs-22-aa/modes/nxml/builder.sh

@@ -0,0 +1,7 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+cd $out/emacs/site-lisp
+tar xvfz $src
+mv nxml-mode-*/* .
+rmdir nxml-mode-*

pkgs/applications/editors/emacs-22-aa/modes/nxml/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "nxml-mode-20041004";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/nxml-mode-20041004.tar.gz;
+    md5 = "ac137024cf337d6f11d8ab278d39b4db";
+  };
+}

pkgs/applications/editors/emacs-22/builder.sh

@@ -0,0 +1,13 @@
+source $stdenv/setup
+
+myglibc=`cat ${NIX_GCC}/nix-support/orig-glibc`
+echo "glibc: $myglibc" 
+
+postConfigure() {
+  cp $myglibc/lib/crt1.o src
+  cp $myglibc/lib/crti.o src
+  cp $myglibc/lib/crtn.o src
+}
+postConfigure=postConfigure
+
+genericBuild

pkgs/applications/editors/emacs-22/crt.patch

@@ -0,0 +1,41 @@
+Only in emacs-21.3: configure.in~
+Only in emacs-21.3: patchfile
+Only in emacs-21.3/src: Makefile.in~
+diff -rc emacs-orig/src/s/gnu-linux.h emacs-21.3/src/s/gnu-linux.h
+*** emacs-orig/src/s/gnu-linux.h	2001-09-28 17:50:04.000000000 +0200
+--- emacs-21.3/src/s/gnu-linux.h	2004-10-06 13:13:19.000000000 +0200
+***************
+*** 173,179 ****
+  /* GNU/Linux usually has crt0.o in a non-standard place */
+  #define START_FILES pre-crt0.o /usr/lib/crt0.o
+  #else
+! #define START_FILES pre-crt0.o /usr/lib/crt1.o /usr/lib/crti.o
+  #endif
+  
+  #ifdef __ELF__
+--- 173,179 ----
+  /* GNU/Linux usually has crt0.o in a non-standard place */
+  #define START_FILES pre-crt0.o /usr/lib/crt0.o
+  #else
+! #define START_FILES pre-crt0.o crt1.o crti.o
+  #endif
+  
+  #ifdef __ELF__
+***************
+*** 225,231 ****
+  #else
+  #undef LIB_GCC
+  #define LIB_GCC
+! #define LIB_STANDARD -lgcc -lc -lgcc /usr/lib/crtn.o
+  #endif
+  
+  /* Don't use -g in test compiles in configure.
+--- 225,231 ----
+  #else
+  #undef LIB_GCC
+  #define LIB_GCC
+! #define LIB_STANDARD -lgcc -lc -lgcc crtn.o
+  #endif
+  
+  /* Don't use -g in test compiles in configure.
+Only in emacs-21.3/src/s: gnu-linux.h~

pkgs/applications/editors/emacs-22/default.nix

@@ -0,0 +1,29 @@
+{ xawSupport ? true
+, xpmSupport ? true
+, xaw3dSupport ? false
+, gtkGUI ? false
+, stdenv, fetchurl, x11, libXaw ? null, libXpm ? null, Xaw3d ? null
+, pkgconfig ? null, gtk ? null
+}:
+
+assert xawSupport && !xaw3dSupport -> libXaw != null;
+assert xawSupport && xaw3dSupport -> Xaw3d != null;
+assert xpmSupport -> libXpm != null;
+assert gtkGUI -> pkgconfig != null && gtk != null;
+
+stdenv.mkDerivation {
+  name = "emacs-22.0.50-pre20051207";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/emacs-22.0.50-pre20051207.tar.bz2;
+    md5 = "011d40367015691e4319ddc65b4e7843";
+  };
+  patches = [./crt.patch];
+  buildInputs = [
+    x11
+    (if xawSupport then if xaw3dSupport then Xaw3d else libXaw else null)
+    (if xpmSupport then libXpm else null)
+  ] ++ (if gtkGUI then [pkgconfig gtk] else []);
+  configureFlags =
+    if gtkGUI then ["--with-x-toolkit=gtk"] else [];
+}

pkgs/applications/editors/emacs-22/modes/cua/builder.sh

@@ -0,0 +1,4 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+cp $src $out/emacs/site-lisp/cua.el

pkgs/applications/editors/emacs-22/modes/cua/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "cua-mode-2.10";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/cua-mode-2.10.el;
+    md5 = "5bf5e43f5f38c8383868c7c6c5baca09";
+  };
+}

pkgs/applications/editors/emacs-22/modes/haskell/builder.sh

@@ -0,0 +1,6 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+tar zxvf $src
+cp haskell-mode*/*.el $out/emacs/site-lisp
+cp haskell-mode*/*.hs $out/emacs/site-lisp

pkgs/applications/editors/emacs-22/modes/haskell/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "haskell-mode-1.45";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/haskell-mode-1.45.tar.gz;
+    md5 = "c609998580cdb9ca8888c7d47d22ca3b";
+  };
+}

pkgs/applications/editors/emacs-22/modes/nxml/builder.sh

@@ -0,0 +1,7 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+cd $out/emacs/site-lisp
+tar xvfz $src
+mv nxml-mode-*/* .
+rmdir nxml-mode-*

pkgs/applications/editors/emacs-22/modes/nxml/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "nxml-mode-20041004";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/nxml-mode-20041004.tar.gz;
+    md5 = "ac137024cf337d6f11d8ab278d39b4db";
+  };
+}

pkgs/applications/editors/emacs/builder.sh

@@ -0,0 +1,13 @@
+source $stdenv/setup
+
+myglibc=`cat ${NIX_GCC}/nix-support/orig-glibc`
+echo "glibc: $myglibc" 
+
+postConfigure() {
+  cp $myglibc/lib/crt1.o src
+  cp $myglibc/lib/crti.o src
+  cp $myglibc/lib/crtn.o src
+}
+postConfigure=postConfigure
+
+genericBuild

pkgs/applications/editors/emacs/crt.patch

@@ -0,0 +1,41 @@
+Only in emacs-21.3: configure.in~
+Only in emacs-21.3: patchfile
+Only in emacs-21.3/src: Makefile.in~
+diff -rc emacs-orig/src/s/gnu-linux.h emacs-21.3/src/s/gnu-linux.h
+*** emacs-orig/src/s/gnu-linux.h	2001-09-28 17:50:04.000000000 +0200
+--- emacs-21.3/src/s/gnu-linux.h	2004-10-06 13:13:19.000000000 +0200
+***************
+*** 173,179 ****
+  /* GNU/Linux usually has crt0.o in a non-standard place */
+  #define START_FILES pre-crt0.o /usr/lib/crt0.o
+  #else
+! #define START_FILES pre-crt0.o /usr/lib/crt1.o /usr/lib/crti.o
+  #endif
+  
+  #ifdef __ELF__
+--- 173,179 ----
+  /* GNU/Linux usually has crt0.o in a non-standard place */
+  #define START_FILES pre-crt0.o /usr/lib/crt0.o
+  #else
+! #define START_FILES pre-crt0.o crt1.o crti.o
+  #endif
+  
+  #ifdef __ELF__
+***************
+*** 225,231 ****
+  #else
+  #undef LIB_GCC
+  #define LIB_GCC
+! #define LIB_STANDARD -lgcc -lc -lgcc /usr/lib/crtn.o
+  #endif
+  
+  /* Don't use -g in test compiles in configure.
+--- 225,231 ----
+  #else
+  #undef LIB_GCC
+  #define LIB_GCC
+! #define LIB_STANDARD -lgcc -lc -lgcc crtn.o
+  #endif
+  
+  /* Don't use -g in test compiles in configure.
+Only in emacs-21.3/src/s: gnu-linux.h~

pkgs/applications/editors/emacs/default.nix

@@ -0,0 +1,24 @@
+{ xawSupport ? true
+, xpmSupport ? true
+, xaw3dSupport ? false
+, stdenv, fetchurl, x11, libXaw ? null, libXpm ? null, Xaw3d ? null
+}:
+
+assert xawSupport && !xaw3dSupport -> libXaw != null;
+assert xawSupport && xaw3dSupport -> Xaw3d != null;
+assert xpmSupport -> libXpm != null;
+
+stdenv.mkDerivation {
+  name = "emacs-21.4a";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/emacs-21.4a.tar.gz;
+    md5 = "8f9d97cbd126121bd5d97e5e31168a87";
+  };
+  patches = [./crt.patch];
+  buildInputs = [
+    x11
+    (if xawSupport then if xaw3dSupport then Xaw3d else libXaw else null)
+    (if xpmSupport then libXpm else null)
+  ];
+}

pkgs/applications/editors/emacs/modes/cua/builder.sh

@@ -0,0 +1,4 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+cp $src $out/emacs/site-lisp/cua.el

pkgs/applications/editors/emacs/modes/cua/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "cua-mode-2.10";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/cua-mode-2.10.el;
+    md5 = "5bf5e43f5f38c8383868c7c6c5baca09";
+  };
+}

pkgs/applications/editors/emacs/modes/haskell/builder.sh

@@ -0,0 +1,6 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+tar zxvf $src
+cp haskell-mode*/*.el $out/emacs/site-lisp
+cp haskell-mode*/*.hs $out/emacs/site-lisp

pkgs/applications/editors/emacs/modes/haskell/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "haskell-mode-1.45";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/haskell-mode-1.45.tar.gz;
+    md5 = "c609998580cdb9ca8888c7d47d22ca3b";
+  };
+}

pkgs/applications/editors/emacs/modes/nxml/builder.sh

@@ -0,0 +1,7 @@
+source $stdenv/setup
+
+mkdir -p $out/emacs/site-lisp
+cd $out/emacs/site-lisp
+tar xvfz $src
+mv nxml-mode-*/* .
+rmdir nxml-mode-*

pkgs/applications/editors/emacs/modes/nxml/default.nix

@@ -0,0 +1,8 @@
+{stdenv, fetchurl}: stdenv.mkDerivation {
+  name = "nxml-mode-20041004";
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/nxml-mode-20041004.tar.gz;
+    md5 = "ac137024cf337d6f11d8ab278d39b4db";
+  };
+}

pkgs/applications/editors/monodevelop/builder.sh

@@ -0,0 +1,29 @@
+source $stdenv/setup
+source $makeWrapper
+
+export MONO_GAC_PREFIX=$monodoc:$gtksharp
+
+postInstall=postInstall
+postInstall() {
+    mv $out/bin $out/bin-orig
+    mkdir $out/bin
+
+    moz=$(ls $mozilla/lib/*/libgtkembedmoz.so)
+
+    for i in $out/bin-orig/*; do
+        echo "wrapping $(basename $i)"
+        # !!! TODO: figure out the MONO_GAC_PREFIX automatically
+        makeWrapper "$i" "$out/bin/$(basename $i)" \
+            --suffix PATH ':' "$(dirname $(type -p mono))" \
+            --suffix PATH ':' "$(dirname $(type -p mono))" \
+            --suffix LD_LIBRARY_PATH ':' "$gtksharp/lib" \
+            --suffix MONO_GAC_PREFIX ':' "$gtksharp" \
+            --suffix MONO_GAC_PREFIX ':' "$gtkmozembedsharp" \
+            --suffix MONO_GAC_PREFIX ':' "$gtksourceviewsharp" \
+            --suffix MONO_GAC_PREFIX ':' "$monodoc" \
+            --set MOZILLA_FIVE_HOME "$(dirname $moz)"
+    done
+}
+
+genericBuild
+

pkgs/applications/editors/monodevelop/default.nix

@@ -0,0 +1,28 @@
+{ stdenv, fetchurl, file, mono, gtksharp, gtksourceviewsharp
+, gtkmozembedsharp, monodoc
+, perl, perlXMLParser, pkgconfig
+, glib, gtk, GConf, gnomevfs, libbonobo, libglade, libgnome
+, mozilla
+}:
+
+stdenv.mkDerivation {
+  name = "monodevelop-0.6-pre2315";
+  builder = ./builder.sh;
+
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/monodevelop-0.6-pre2315.tar.bz2;
+    md5 = "8c33df5629b0676b7ab552854c1de6fd";
+  };
+
+  makeWrapper = ../../../build-support/make-wrapper/make-wrapper.sh;
+  
+  patches = [./prefix.patch];
+  
+  buildInputs = [
+    file mono gtksharp gtksourceviewsharp perl perlXMLParser pkgconfig
+    glib gtk GConf gnomevfs libbonobo libglade libgnome
+    gtkmozembedsharp monodoc
+  ];
+  
+  inherit mozilla monodoc gtksharp gtkmozembedsharp gtksourceviewsharp;
+}

pkgs/applications/editors/monodevelop/prefix.patch

@@ -0,0 +1,44 @@
+diff -rc MonoDevelop-orig/Makefile.in MonoDevelop/Makefile.in
+*** MonoDevelop-orig/Makefile.in	2005-03-09 17:43:58.000000000 +0100
+--- MonoDevelop/Makefile.in	2005-03-09 18:10:20.000000000 +0100
+***************
+*** 298,304 ****
+  # (mkdir ../../build/bin/ hack)
+  SUBDIRS = Core build po Extras
+  bin_SCRIPTS = monodevelop
+! gnome_data = @gnome_prefix@/share
+  desktopdir = $(gnome_data)/applications
+  desktop_DATA = monodevelop.desktop
+  pixmapdir = $(gnome_data)/pixmaps
+--- 298,304 ----
+  # (mkdir ../../build/bin/ hack)
+  SUBDIRS = Core build po Extras
+  bin_SCRIPTS = monodevelop
+! gnome_data = @prefix@/share
+  desktopdir = $(gnome_data)/applications
+  desktop_DATA = monodevelop.desktop
+  pixmapdir = $(gnome_data)/pixmaps
+***************
+*** 809,818 ****
+  all:
+  
+  install-data-hook:
+! 	$(UPDATE_MIME_DB) $(gnome_data)/mime
+  
+  uninstall-hook:
+! 	$(UPDATE_MIME_DB) $(gnome_data)/mime
+  
+  run: runmd
+  
+--- 809,818 ----
+  all:
+  
+  install-data-hook:
+! #	$(UPDATE_MIME_DB) $(gnome_data)/mime
+  
+  uninstall-hook:
+! #	$(UPDATE_MIME_DB) $(gnome_data)/mime
+  
+  run: runmd
+  
+Only in MonoDevelop: Makefile.in~

pkgs/applications/editors/monodoc/builder.sh

@@ -0,0 +1,21 @@
+source $stdenv/setup
+source $makeWrapper
+
+postInstall=postInstall
+postInstall() {
+    mv $out/bin $out/bin-orig
+    mkdir $out/bin
+
+    for i in $out/bin-orig/*; do
+        echo "wrapping $(basename $i)"
+        # !!! TODO: figure out the MONO_GAC_PREFIX automatically
+        makeWrapper "$i" "$out/bin/$(basename $i)" \
+            --suffix PATH ':' "$(dirname $(type -p mono))" \
+            --suffix MONO_GAC_PREFIX ':' "$gtksharp" \
+            --suffix MONO_GAC_PREFIX ':' "$out"
+    done
+}
+
+genericBuild
+
+

pkgs/applications/editors/monodoc/default.nix

@@ -0,0 +1,17 @@
+{stdenv, fetchurl, mono, gtksharp, pkgconfig}:
+
+stdenv.mkDerivation {
+  name = "monodoc-1.0.6";
+
+  builder = ./builder.sh;
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/monodoc-1.0.6.tar.gz;
+    md5 = "f2fc27e8e4717d90dc7efa2450625693";
+  };
+
+  makeWrapper = ../../../build-support/make-wrapper/make-wrapper.sh;
+
+  buildInputs = [mono gtksharp pkgconfig];
+
+  inherit gtksharp;
+}

pkgs/applications/editors/nano/default.nix

@@ -0,0 +1,10 @@
+{stdenv, fetchurl, ncurses}:
+
+stdenv.mkDerivation {
+  name = "nano-1.2.4";
+  src = fetchurl {
+    url = http://nix.cs.uu.nl/dist/tarballs/nano-1.2.4.tar.gz;
+    md5 = "2c513310ec5e8b63abaecaf48670ac7a";
+  };
+  buildInputs = [ncurses];
+}